2″ Compact Low Pressure (LP) Disc-Kleen Filters are the perfect solution when automation is desired because manual cleaning is frequent and too cumbersome. A new redesigned filter spine allows flushing at a lower pressure – 30 psi. This saves money on energy costs and maintains water flow to the field during the flushing cycle for crop uniformity. The built-in backflush controller, operated by pressure differential gauge and/or time, operates on (4) D batteries. The filter now has a grey colored body and cover for easy identification. Installation is easy with this pre-assembled compact unit. There are two models based on overall flow with a maximum flow rate of 80 GPM.
Applications:
Irrigation systems with a capacity of 1 to 80 GPM requiring clean water to operate drippers or micro-sprinklers.
For areas with or without electricity.
When automatic backflushing is desirable because manual cleaning is frequent and too cumbersome
Specifications:
Standard Model: 1-80 GPM
Low Flow Model: 1-40 GPM
Inlet: 2 in. Male Pipe Thread
Outlet: 2 in. Female Pipe Thread
Flush Port: 2 in. Femail Pipe Thread
Max Operating Water Pressure: 90 psi
Min Pressure for Backflush: 90 psi
Min Flow for Backflush:
Standard Model - 35 GPM
Low Flow Model - 20 GPM
Min Allowable pH: 5
Product Advantages:
Proven depth filtration filters through the entire depth of the disc ring, not just the surface.
Non-corrosive, UV protected polypropylene materials resist rust and corrosion from chemicals and weathers.
Factory assembled and tested for a quick and easy water in/water out installation
Small Footprint saves valuable space
Less backflush time optimizes overall irrigation application of water
Features:
Compact pre-assembled unit for easy installation - fits in tight spaces
AC models uses 110 VAC power source; includes a 100 to 24 V transformer and uses a 24 VAC solenoid
DC model uses (4) D batteries and a 12 VDC Latching solenoid
Built-in backflush controller functions by pressure differential gauge and/or time
Easily accessible bypass screen filter ensures clean water for backflushing
Filtration Process - during the filtration process, unfiltered water passes through the stack of tightly compressed discs, and debris is trapped by the interlocking grooves of the disc rings, and only filtered water is released to the irrigation system
Backflush Process - as debris in the filter increases, the backflush process is initiated. The discs separate and jets of clean water spray and spin the discs removing the trapped debris which is then flushed out.
Product Advantages:
10" manifold for all filter sizes means easier installations and has a smaller footprint. Water inlet and outlet versatility because grower chooses what works best for the application
Lightweight, easy to use polymeric (plastic) clamps secure the filter cover to the filter cover to the filter body
Less overall water used for flushing - shorter overall flush cycle ensures better uniformity of irrigation and less flush water to dispose or filter for reuse
Lower installation costs - pre-assembled and ready to install. Flange and bolt kits make assembling multiple filter units easy with minimal additional installation costs
Smaller footprint - easier and faster to install while saving money on concrete pad size
Eliminates leaks and rusting - synthetic materials are not damaged by chemical injection or organic materials in the water and will no corrode
Applications:
Agricultural Irrigation for permanent and row crops